Walnut Amadora

High quality prefinished door

American Black Walnut

Special offer sale price – limited period only

IMPORTANT: SPEC. CHANGE
Please note that LPD changed the spec. of these doors during 2011. If you are trying to match these new doors to existing doors, if you bought the original doors before June 2011, the chances are that they will not match. The earlier model is no longer available.

IMPORTANT NOTICE

Special attention is required if trimming these doors to size as the groove detail can be damaged while planing the edges. To maintain the grain effect the timber goes straight through the edge lipping. Care must be taken to cut into the face of the grooved timber insert to create a break point before the edges are planed. Below we show you how. Ensure all your tools are sharp.

Step 1
Mark the edge of the door where you will be planing.

Step 2
Cut into the face of the door where your mark is. This is where you will plane to, ensuring that you do not go past this cut. This needs to be done on every grove on both sides.

Step 3
Plane the door edge using a cut of ½mm or less until you are at your mark and cut.

Step 4
Planed correctly up to your mark with no breakage.

Incorrect
This breakage is caused when the following guidelines are NOT followed and we will not accept liability should you damage your door in this way.

Download an installation guide here

Watch a video of a Santandor being planed to size.